Panasonic TQBJ0349 - Manual (Page 93)

ENGLISH -
93
Appendix
Cautions on Wireless LAN Module Installation
The optional Wireless LAN Module (part number ET-WM200U) is required to use
wireless LAN functions.
During installation, remove the cap from the Wireless LAN Module and mount the
module in the projector.
Procedure
Remove the setscrew of the Wireless 1 )
LAN Module cover, and remove this
cover from the projector.
Face the LED lamp of the Wireless LAN 2 )
Module upward, and insert the module
into the slot.
Close the Wireless LAN Module cover, 3 )
and secure it by tightening the Wireless
LAN Module cover fixing screw.
Note
Keep the small parts out of the reach of small children. z
Tighten screws using a torque screwdriver or others. Do not use an electric screwdriver or an impact z
screwdriver.
The serial number of accessories and optional parts is subject to change without notice. z
Wireless LAN Module cover
fixing screw
Wireless LAN Module cover
LED lamp