Panasonic TQBJ0349 - Manual (Page 43)

PICTURE menu
ENGLISH -
43
Settings
BRIGHTNESS
You can adjust the brightness of the projected image.
Press ▲▼ to select [BRIGHTNESS]. 1 )
Press ◄► or button. 2 )
The [BRIGHTNESS] individual adjustment z
screen will be displayed.
Press ◄► to adjust the level. 3 )
Operation Adjustment
Adjustment
range
Press ►.
Increases the
brightness of the
dark (black) parts of
the screen.
Maximum
value 31
Press ◄.
Reduces the
brightness of the
dark (black) parts of
the screen.
Minimum
value -31
COLOR
You can adjust the color saturation of the projected
image.
Press ▲▼ to select [COLOR]. 1 )
Press ◄► or button. 2 )
The [COLOR] individual adjustment screen will z
be displayed.
Press ◄► to adjust the level. 3 )
Operation Adjustment
Adjustment
range
Press ►. Deepens colors.
Maximum
value 31
Press ◄. Weakens colors.
Minimum
value -31
TINT
You can adjust the skin tone in the projected image.
Press ▲▼ to select [TINT]. 1 )
Press ◄► or button. 2 )
The [TINT] individual adjustment screen will be z
displayed.
Press ◄► to adjust the level. 3 )
Operation Adjustment
Adjustment
range
Press ►.
Adjusts skin tone
toward greenish
color.
Maximum
value 31
Press ◄.
Adjusts skin tone
toward reddish-
purple.
Minimum
value -31
COLOR TEMPERATURE
You can adjust the white balance of the projected
image.
Press ▲▼ to select [COLOR 1 )
TEMPERATURE].
Press ◄► or button.
2 )
The [COLOR TEMPERATURE] individual z
adjustment screen will be displayed.
Press ◄► to switch [COLOR 3 )
TEMPERATURE].
The setting will change as follows each time z
◄► is pressed.
DEFAULT Û USER
HIGH MIDDLE
[DEFAULT] cannot be selected when the : Û
[PICTRUE MODE] has been set to [DICOM SIM.].
Note
When any setting other than [OFF] has been selected z
for [COLOR MATCHING] ( Æ page 53), the [COLOR
TEMPERATURE] setting is fixed to [USER1].
J
To further adjust toward the
desired white balance
Select [USER] in Step 3). 4 )
Press button. 5 )
The [COLOR TEMPERATURE] screen will be z
displayed.
Press ▲▼ to select [WHITE 6 )
BALANCE].