Panasonic TQBJ0349 - Manual (Page 60)

DISPLAY OPTION menu
60
- ENGLISH
Settings
FREEZE
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
Press ▲▼ to select [FREEZE]. 1 )
Press button. 2 )
Press z
SIDE BY SIDE
(PT-DZ570U and PT-DW530U only)
When a small sub-screen is placed in the main
screen, dual images can be projected simultaneously.
Press ▲▼ to select [SIDE BY SIDE]. 1 )
Press button. 2 )
Dual screens are projected. z
Press 3 )
The [SIDE BY SIDE] is displayed. z
Press ▲▼ to select each item. 4 )
SIDE BY SIDE MODE MAIN INPUT
SIDE BY SIDE OFF SUB-INPUT
SIDE BY
SIDE
MODE
Selects a SIDE BY SIDE display pattern
from [MODE1] to [MODE4].
Select [SIDE BY SIDE MODE] in Step z
4, and press ◄► to switch to any of
[MODE1] to [MODE4].
MAIN
INPUT
Sets an input terminal to be displayed
for signal main input.
Select [MAIN INPUT] in Step 4, press z
button, and press ▲▼ to
select any of [VIDEO], [S-VIDEO],
[RGB1], [RGB2], [DVI-D], [HDMI] and
[NETWORK]. Then, press
button.
SUB
INPUT
Sets an input terminal to be displayed
for signal sub input.
Select [SUB INPUT] in Step 4, press z
button, and press ▲▼ to
select any of [VIDEO], [S-VIDEO],
[RGB1], [RGB2], [DVI-D], [HDMI] and
[NETWORK]. Then, press
button.
CLOCK PHASE:
If RGB1 or RGB2 terminal is set for
signal sub input and if pictures flicker or
their outlines blur, adjust the clock phase
between 0 and 63.
Select [SUB-INPUT] in Step 4, press z
button, and press ▲▼ to
select [CLOCK PHASE]. Then, press
◄► to change the clock phase.
SIDE BY
SIDE OFF
Turns Off the dual-screen projection.
Select [SIDE BY SIDE OFF] in Step 4, z
and press button.
Note
The SIDE BY SIDE function is not available depending z
on the input signals and the selected input terminals.
See “Two window display combination list” for details.
( Æ page 86)
The MAIN INPUT settings apply to the [PICTURE z
MODE], [GAMMA], and [COLOR TEMPERATURE] video
settings.