Panasonic TQBJ0349 - Manual (Page 56)

DISPLAY OPTION menu
56
- ENGLISH
Settings
AUTO SETUP
Use this setting when adjusting a specific or oblong
(16:9, etc.) signal.
Press ▲▼ to select [AUTO SETUP]. 1 )
Press button. 2 )
The [AUTO SETUP] screen will be displayed. z
Press ▲▼ to select [MODE]. 3 )
Press ◄► to switch [MODE]. 4 )
The setting will change as follows each time z
◄► is pressed.
DEFAULT WIDE USER
DEFAULT
To receive signals of which image
aspect is 4:3 or 5:4
(applicable resolution : 640 Ч 400,
640 Ч 480, 800 Ч 600, 832 Ч 624,
960 Ч 720, 1 024 Ч 768,
1 152 Ч 864, 1 152 Ч 870,
1 280 Ч 960, 1 280 Ч 1 024,
1 600 Ч 1 200, 1 400 Ч 1 050)
WIDE
To receive signals of which the
image aspect is wide
(applicable resolution: 720 Ч 400,
848 Ч 480, 1 280 Ч 720,
1 024 Ч 600, 1 120 Ч 750,
1 440 Ч 900, 1 680 Ч 1 050)
USER
To receive signals of specific
horizontal resolution (number of
horizontally displayed dots)
If [USER] is selected, press ◄► to 5 )
enter the horizontal resolution of
signal source into [DISPLAY DOTS].
Press button.
6 )
Execute automatic adjustment. A message z
“PROGRESS” appears during automatic
adjustment. When the adjustment is complete,
the system returns to the input screen.
J
Adjusting the position
automatically
Select [POSITION ADJUST] in step 3). 1.
Press ◄► to switch [POSITION 2.
ADJUST].
The setting will change as follows each time z
◄► is pressed.
OFF ON
OFF Automatic adjustment is off.
ON
Screen position and size are
adjusted during AUTO SETUP
operation.
J
Adjusting the signal level
automatically
Select [SIGNAL LEVEL ADJUST] in 1.
step 3).
Press ◄► to switch [SIGNAL LEVEL
2.
ADJUST].
The setting will change as follows each time z
◄► is pressed.
OFF ON
OFF Automatic adjustment is off.
ON
The black level (On-screen menu
[BRIGHTNESS]) and white level
(On-screen menu [CONTRAST])
are adjusted during AUTO SETUP
operation.
Note
If the input image is not a still image with a clear z
difference between black and white, the [SIGNAL LEVEL
ADJUST] function may not operate normally.