Philips DVP3345VB - Manual (Page 17)

EN - 17
English
17 Disc Playback
Before you begin, turn on the TV, Stereo and other equipment connected to the DVD/VCR. Make sure the TV and the
Stereo (if applicable) are set to the correct channel. Details are on pages 9-13.
1
Press y to turn on the DVD/VCR.
2
Press DVD so DVD light appears on the front of the DVD/VCR.
3
Press OPEN/CLOSE A to open the disc tray.
4
Place a disc onto the tray. If the DVD is recorded on only one side,
place the disc on the tray with the label facing up and the shiny side
facing down. Some DVDs are recorded on both sides. Make sure the
label of the side you want to play is facing up.
5
Press PLAY B to close the tray. The tray will close and playback
will begin. If playback does not start automatically, press PLAY B again.
If a DVD Menu appears instead, see page 33.
To play MP3, Windows Media™ Audio or JPEG files, see pages 44-45.
You also can close the tray by pressing OPEN/CLOSE A.
● Press STOP C to stop playback.
REMINDER : This DVD/VCR will play
only certain discs.
See page 8 for details.
Helpful Hint
• An “X” may appear at the top right
corner of the TV screen when you try
a feature. Either the feature is not
available on the disc, or the DVD/VCR
cannot access the feature at this time.
This does not indicate a problem with
the DVD/VCR.
• If a disc is dirty or scratched, the
picture may appear distorted or
playback may stop. In such cases,
remove the disc and turn off the DVD/
VCR. Disconnect the power cord,
then reconnect it. Clean the disc, then
turn on the DVD/VCR again and
reinsert the disc for playback.
• If a disc has multiple layers, the picture
may freeze occasionally. This happens
when the first layer switches to the
second layer. This is not a malfunction.
• When the DVD or CD light appears
on the display panel, the disc is loaded
and ready for playback.
• When you press OPEN/CLOSE A or
PLAY B (DVD) on the front of the
DVD/VCR when the power is off, the
DVD/VCR will turn on in DVD mode.
Otherwise, the DVD/VCR will turn on
in the mode in which it was turned off.
• If you use PLAY B to close the disc
tray, playback starts automatically. If
you use OPEN/CLOSE A to close the
disc tray, you have to press PLAY B to
start playback.
DVD VCR SETUP
INPUT MENU
DISPLAY SUBTITLE ZOOM AUDIO
BACK PAUSE STOP
PLAY
OK
FFW REW
CLEAR TITLE
DISC
TRACKING
OPEN/CLOSE
1 2
6 5 4
7 8 9
0 +10
3
1
3,5
2
5
4
Insert a disc.
E8E2CCD_E8E2CCH_EN_v1.book Page 17 Friday, March 9, 2012 6:37 PM