First-time dvd/vcr setup, 15 first-time dvd/vcr setup, English – Philips DVP3345VB User Manual
Page 15: Helpful hint
EN - 15
English
15
First-time DVD/VCR Setup
Before turning on your DVD/VCR,make sure batteries are in the remote control and the DVD/VCR and TV are connected
correctly.
These menus may not appear if you have already turned on the DVD/VCR.
1
Turn on the TV. Set it to the correct Video In channel.
(Check your TV owner’s manual for details.)
2
Press y. VCR light will appear on the front of the DVD/VCR. The
display shown below will appear.
These menus may not appear if you have already turned on the DVD/
VCR. You may have turned on the DVD/VCR before to find the Audio/
Video In channel of the TV, for example. If so, follow the steps on
page 21 to select a language for the VCR menus.
3
Press ▲ or ▼ to select ENGLISH, FRANCAIS (French) or
ESPAÑOL (Spanish) as the language for VCR On-Screen Displays
and menus.
Then, press ►.
●
To put the DVD/VCR in VCR mode, press VCR so VCR light appears.
DVD
VCR
SETUP
INPUT
MENU
REC
SPEED
MODE
ANGLE
SEARCH
REPEAT
DISPLAY SUBTITLE
ZOOM
TIMER SET
REPEAT
A-B
AUDIO
BACK
PAUSE
STOP
PLAY
OK
FFW
REW
CLEAR
TITLE
DISC
TRACKING
OPEN/CLOSE
1
2
6
5
4
7
8
9
0
+10
3
Helpful Hint
• To skip this feature and play a tape
immediately, insert a tape with its
record tab removed.
• Repeat this process if the power fails.
2
1
3
Turn on the TV.
LANGUAGE SELECT
ENGLISH
FRANÇAIS
ESPAÑOL
[ON]
PUSH
E8E2CCD_E8E2CCH_EN_v1.book Page 15 Friday, March 9, 2012 6:37 PM