Philips DVP3345VB - Manual (Page 11)

EN - 11
English
11 Hookups (cont’d)
DVD/VCR to a TV that has Audio/ Video, Component Video or S-Video In jacks
1
Connect the red and white audio cable (supplied) to the red
and white DVD or DVD/VCR AUDIO OUT jacks on the DVD/
VCR and to the red and white Audio In jacks on the TV.
● If you are using DVD/VCR AUDIO OUT jacks for your audio
connection, use 2a method for your video connection. If you are using
DVD AUDIO OUT jacks for your audio connection, use 2b or 2c
method for your video connection.
2
a
Connect the yellow video cable (supplied) to the DVD/VCR
VIDEO OUT jack on the DVD/VCR and to the Video In jack
on the TV. The Video In jack on the TV is usually yellow and may
be labeled CVBS, Composite or Baseband video.
2
b
Connect component video cable (not supplied) to the
COMPONENT VIDEO OUT jacks on the DVD/VCR and to
the Component Video In jacks on the TV. The Component
Video In jacks on the TV are usually red, blue and green.
2
c
Connect an S-Video cable (not supplied) to the S-VIDEO
OUT jack on the DVD/VCR and to the S-Video In jack on
the TV.
3
Connect the power cords of the TV and the DVD/VCR to a
power outlet. Turn on the TV and set it to the correct Video In
channel.
If you are using the yellow video cable for VCR playback, choose the
Video In channel at your TV. To find the correct Video In channel, go to
your lowest TV channel and change channels downward until you see
VCR playback on the TV screen. To help you find the right Video In
channel,turn on the DVD/VCR. Press DVD to put the DVD/VCR in
DVD mode. With no disc in the player, a large DVD Video logo will
appear on the TV screen when you get the TV on the correct Video In
channel.
4
You are ready to turn on the DVD/VCR. Go to page 15 to
complete the first-time setup.
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
DVD
L
R
L
R
L
R
S-VIDEO OUT COMPONENT VIDEO OUT
Y
C B / P B
AUDIO OUT
DVD/VCR VCR
VIDEO OUT
AUDIO IN
VIDEO IN
C R /
P R
AUDIO IN
S-VIDEO IN
L
R
AUDIO
OUT
DVD
L
R
S-VIDEO
OUT
COMPONENT VIDEO OUT
Y
C B /
P B
C R /
P R
AUDIO IN
Y
Cb/Pb
Cr/Pr
COMPONENT
VIDEO IN
L
R
AUDIO
OUT
DVD
L
R
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C B /
P B
C R /
P R
AUDIO IN
VIDEO IN
L
R
1
2 a
1
2 c
2
b
1
Audio and Video IN
Jacks on TV
Audio Cable (supplied)
Back of TV
Back of TV
Video Cable
(supplied)
Helpful Hint
• Match the cable colors to the jack
colors. If the TV has a single Audio In
jack, use the white audio cable to
connect the DVD/VCR’s white
AUDIO OUT (left) jack to the TV’s
Audio In jack. You will not use the red
cable. Or, purchase a “splitter” audio
cable to go from the left/right AUDIO
OUT jacks of the DVD/VCR to the
TV’s single Audio In jack.
E8E2CCD_E8E2CCH_EN_v1.book Page 11 Friday, March 9, 2012 6:37 PM