Palm Tungsten T5 - Manual (Page 102)

Tungsten™ T5 Handheld 93
CHAPTER 12 Making Wireless Connections
Entering basic Bluetooth settings
The input area always appears when you are using any of the Bluetooth screens. You
cannot turn off the input area when working with Bluetooth technology.
0
1
Go to Favorites and select Bluetooth .
2
Enter the basic Bluetooth
settings:
a. Select On.
b. Tap the Device Name field and
enter a name for your
handheld. This is the name
other Bluetooth devices see
when they connect to your
handheld. By default it is the
username you use during
synchronization, but you can
change it.
c. Select the Discoverable pick
list and select Yes or No.
Done
Tip
You can also open the
Bluetooth settings screen
by selecting Bluetooth
controls on the status bar
and then selecting Prefs
from the screen that
appears.
»
Key Term
Discoverable Setting
that allows other devices
to find and connect with
your handheld using
Bluetooth technology. If
your handheld is not
discoverable, other
devices cannot find it to
make a connection. Your
handheld must be
powered on in order to be
discoverable.
NOTE