Pentax Optio T30 - Manual (Page 16)

Installing the Battery
14
1
Getting
Starte
d
Use the battery charger to charge the battery before using it in the camera
for the first time, after a long period of non-use, or when the [Battery
depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6ft (1.8m)”
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into a power outlet.
3
Place the battery in the charger with the PENTAX logo
facing up.
The charging indicator glows red while charging.
It goes out when charging is finished.
4
Remove the battery from the battery charger when fully
charged.
Memo
• The time required to fully charge the battery is about 120 minutes (max.).
The appropriate ambient temperature for charging the battery is 0°C to 40°C
(32°F to 104°F). The charging time may vary depending on the ambient
temperature and other conditions.
• The battery has reached the end of its service life when it starts to run down
soon after being charged. Replace with a new battery.
Installing the Battery
Charging the Battery
Battery charger
3
Battery
To power outlet
AC plug
cord
1
2
Charging indicator
While charging:
Glows red
Charging finished:
Goes out