Polaris 120 XC SP - Manual (Page 85)

A--66
MAINTENANCE
NOTE:
If rear idler wheel (1)
assembly washers are
removed, be sure they are
reinstalled with the domed
side of the washer facing
out (2) as shown.
Suspension
Lubrication
To maintain rider comfort
and to retard wear of the
pivot shafts, the suspension
pivot shafts should be
lubricated with Polaris
Premium All Season
Grease, PN 2871066, several times during the season and again before
summer storage each year. The riding characteristics of the
snowmobile will be affected by lack of lubrication of these shafts.
NOTE: A grease gun kit complete with grease and adaptors is
available to lubricate all fittings on Polaris snowmobiles. Order PN
2871312.
IMPORTANT: Make it a weekly practice to check for loose bolts and
nuts on the suspension system. If any loose bolts are found on the rail
be certain to clean the threads and apply Loctite 262 before tightening.
2
1