Polaris 120 XC SP - Manual (Page 31)

A--12
OPERATION WARNINGS
n
Brake Lever Travel
Measure the clearance
between the lever and
brake block. Inspection
should be made with the
lever firmly depressed.
Distance A should be no
more than 3/4″ (1.9 cm).
Excessive travel
indicates a need to
adjust the brake cable.
Refer to the mechanical
brake adjustment
information on page
A--46.
n
Check to See That the Hood is Securely Latched
The hood of the snowmobile protects the operator from moving and hot
parts as well as aiding in sound emission control and various other func-
tions. Under no circumstances should your snowmobile be operated with
the hood open or removed.
n
Engine Stop Switch
Check engine stop switch for proper operation. Push down to stop
engine. Pull up to release and start engine.
n
Tether Switch
Check tether switch for proper operation.
n
Remove Ignition Key
Don’t tempt someone to steal or ride your snowmobile without
permission by leaving the key in the ignition.
n
Lighting Check
Check headlight and taillight for normal operation.
n
Check Surroundings to Verify Clear Operating Area
It is important to make certain there is a clear area all around the
snowmobile, including an area clear of bystanders. Remember that the
possibility always exists of some sideways vehicle movement or of
debris being thrown by the track. Teach the operator to check the
operating area before riding.
A