Polaris 120 XC SP - Manual (Page 82)

A--63
MAINTENANCE
Steering Inspection and Adjustment
The steering assembly of the
machine should be checked
periodically for loose nuts and
bolts. See A,B,C,D,E, F, and
G in illustration at right.
With handlebars in straight
ahead position and measuring
from the straight edge of the
skis, the measurement
between the skis at point H
should be 1/8 inches greater
than point I, as shown on the
following page. NOTE: This
measurement should be taken
with the vehicle weight
compressing the suspension.
If the skis are misaligned, we
recommend that your dealer
make the necessary
adjustments.
F
E
D
C
B
A
H
I
G