Linksys EtherFast 10/100 Network In a Box FENSK05 - Manual (Page 62)

Starting Over in
Windows
Installing Windows Network Components from
Scratch
If you experience installation difficulties, you may need
to re-install all of the Windows networking components
from scratch. The instructions below explain how to
give your PC a clean sweep so that you can start the
EtherFast Card’s software installation over.
1. At the desktop click on the Start Button, highlight
Settings, click on Control Panel.
2. Double-click on the Network Icon.
3. Look at the box with the text that reads, The follow-
ing network components are installed.
4. If the box has a component called Dial-Up Adapter,
skip forward to step 6. If it doesn’t, go to step 5.
5. Remove any instance on the name Linksys in the box.
This includes IPS/SPX…Linksys, NetBEUI…Linksys,
and TCP/IP…Linksys. Also remove Client for Microsoft
Networks, Client for Netware Networks, and File and
Printer Sharing for Microsoft Networks.
60
Appendix