Linksys EtherFast 10/100 Network In a Box FENSK05 - Manual (Page 21)

Windows 95 Version A Setup
1. Windows 95 will detect the EtherFast card and dis-
play a New Hardware Found window as shown below.
2. Put the EtherFast Card software disk into drive A.
Using your mouse, select the Driver from disk provided
by hardware manufacturer option on the screen, then
click OK. When asked for the location of the files,
type a:\ and click OK.
3. Windows 95 will copy the appropriate network driv-
ers to your computer. If 95 asks you to supply your
original Windows 95 installation CD-ROM or setup
disks, insert them into your computer and direct 95 to
the proper directory on the disk(s).
After 95 is finished copying the necessary files to your
computer, it may ask you to restart your computer.
Choose to do so. After your system restarts, turn to
page 21 and follow the instructions on preparing your
PC for use on a network.
19
Windows 95