Linksys EtherFast 10/100 Network In a Box FENSK05 User Manual

Page 22

Windows 95 Version B Setup

1. While the Update Device Driver Wizard window is
visible, put the EtherFast Card software disk into drive
A and click on Next.

2. When the next window appears, click on the Other
Locations button.

Type a:\ in the Location box and click on the OK but-
ton. Windows 95 will find the Linksys LNE100TX Fast
Ethernet Adapter driver on the disk.

3. Click on the Finish button. Windows 95 will begin
copying a number of files to your computer. If 95 asks
you to supply your original Windows 95 installation
CD-ROM or setup disks, insert them into your comput-
er and direct Windows 95 to the proper directory on the
disk(s). If 95 asks you to supply a driver that starts with
the letters LNE, type a:\ in the box that pops up and
press Enter.

4. When asked if you want to restart your computer,
click on Yes and allow your system to restart.

Now go to page 21 to learn how to set up your PC for
use on a network.

Windows 95