Linksys EtherFast 10/100 Network In a Box FENSK05 - Manual (Page 61)

time. Unless you have two PCs with the same card,
don't enable this test.
4. When you've selected the desired tests, press Alt-T to
begin the testing cycle. The word Passed will appear
next to each test that is successful. To repeat the testing
cycle, press Alt-R and select the number cycles you'd
like to test. If the card fails the Peer-to-Peer, Ping, or
Bandwidth tests, any network problems that you are
experiencing are external to the card. Check your
cabling and hub connections. If the card fails the
Loopback or Register tests, check your computer's set-
tings, then contact Linksys Customer Support for help.
59
Appendix