Linksys EtherFast 10/100 Network In a Box FENSK05 - Manual (Page 23)

Preparing Windows 95 For Use on a Network --
Step 1
Once you are back at the Windows 95 desktop, you can
make any necessary changes to your system's network
settings by clicking on your taskbar's Start button, then
Settings, then Control Panel, and then the Network
icon.
The Network window will appear. Click on the
Configuration tab.
Make sure that the following network components are
installed:
Client for Microsoft Networks
Client for Netware Network
Linksys LNE100TX Fast Ethernet Adapter
IPX/SPX-compatible Protocol
NetBEUI
There may be other components listed in addition to the
ones shown above. However, if any components shown
above are missing, you’ll need to install them manually.
Skip to the section entitled Manually Installing Network
Components at the back of this guide on page 64.
21
Windows 95