Linksys EtherFast 10/100 Network In a Box FENSK05 - Manual (Page 31)

10. NT will copy the necessary network drivers to your
computer. When the copying is complete, you will see a
list of installed bindings. You can change the bindings
settings as necessary if needed. When all of the settings
are acceptable, click on Next, then Next again to start
the NT network.
11. When asked to do so, enter your computer's
Computer Name.
Then choose either Workgroup or Domain, depending
on the type of network you're setting up. Your NT user
guide(s) explain the difference between Workgroups and
Domains.
When you're finished, click on Next, followed by
Finish. When asked if you want to restart your comput-
er, click on Yes.
After your computer restarts, the network setup is com-
plete. To see the rest of the network, double-click on the
Network Neighborhood icon that resides on your NT
desktop. The setup is complete.
29
Windows NT