Lexmark 5025 - Manual (Page 145)

C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray.
1 From the printer control panel Paper menu, check the Paper Type setting.
2 Before sending the job to print, specify the correct type setting:
• For Windows users, specify the type from Print Properties.
• For Macintosh users, specify the type from the Print dialog.
M
AKE SURE
C
OLOR
S
AVER IS SET TO
O
FF
Color Saver may be set to On.
T
HE TONER MAY BE LOW
When 88 Cartridge Low appears or when the print becomes faded, replace the toner cartridge.
A
TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.
T
HE IMAGING KIT MAY BE WORN OR DEFECTIVE
Replace the imaging kit.
Note: The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black and
color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.
Repeating defects
) )
) )
R
EPEATING MARKS OCCUR REPEATEDLY ONLY IN ONE COLOR AND MULTIPLE TIMES ON A PAGE
Replace the developer unit if the defects occur every 43.9 mm (1.7 in.)
Replace the imaging kit if the defects occur every:
• 34.6 mm (1.4 in.)
• 94.2 mm (3.71 in.)
Troubleshooting
145