Lexmark 5025 - Manual (Page 130)

Try one or more of the following:
• Press to clear the message and continue printing.
• Turn the power off and then back on to reset the printer.
• Upgrade (flash) the network firmware in the printer or print server.
56 Standard USB port disabled
Try one or more of the following:
• The printer discards any data received through the USB port. Press to clear the message and continue printing.
• Make sure the USB Buffer menu item is not set to Disabled.
58 Too many flash options installed
Try one or more of the following:
• Turn the printer off, and then remove extra flash options:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess flash memory.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
• Press to clear the message and continue printing.
58 Too many trays attached
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.
3 Remove the additional tray(s).
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
59 Incompatible tray
Only options designed specifically for this printer are supported.
Try one or more of the following:
• Remove the specified tray.
• Press the arrow buttons until Continue appears, and then press to clear the message and continue printing
without using the specified tray.
Troubleshooting
130