LevelOne WBR-6005 - Manual (Page 51)

◆ Secondary DNS Server — The IP address of the Secondary Domain
Name Server on the network.
◆ MAC Clone — Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC
address of the Wireless Router‘s WAN interface to match the PC‘s MAC
address provided to your ISP for registration. You can enter the
registered MAC address manually by typing it in the boxes provided.
Otherwise, connect only the PC with the registered MAC address to the
Wireless Router, then click the ―Clone your PC‘s MAC Address‖ (Default:
Disable)
PPP O E Enables the Wireless Router IP address to be assigned automatically from
an Internet service provider (ISP) through a DSL modem using Point-to-
Point Protocol over Ethernet (PPPoE).
Figure 26: PPPoE Configuration
The following items are displayed on this page:
◆ PPPoE User Name — Sets the PPPoE user name for the WAN port.
(Default: pppoe_user; Range: 1~32 characters)
◆ PPPoE Password — Sets a PPPoE password for the WAN port.
(Default: pppoe_password; Range: 1~32 characters)
◆ Verify Password — Prompts you to re-enter your chosen password.
– 51 –
C HAPTER 6 | Internet Settings
WAN Setting