Roubleshooting, Led i – LevelOne WBR-6005 User Manual

Page 106

IAGNOSING

LED I

NDICATORS

Table 4: LED Indicators

◆

Power/LAN LEDs are off

The AC power adapter may be disconnected. Check

connections between the Wireless Router, the power adapter,

and the wall outlet.

◆

WLAN LED is off

The access point radio has been disabled through it‘s web

management interface. Access the management interface

using a web browser to enable the radio.

◆

LAN LEDs are off

(when port connected)

Verify that the Wireless Router is powered on.

Be sure cables are plugged into both the Wireless Router and

corresponding PC.
Verify that the proper cable type is used and its length does

not exceed specified limits.
Check the cable connections for possible defects. Replace the

defective cable if necessary.

◆

WAN LED is off

There is no detected signal from WAN port. Check

connections and the management interface.

ANNOT

ONNECT TO THE

NTERNET

Check the following items:

◆

Check that your computer is properly configured for TCP/IP.

◆

Make sure the correct network adapter driver is installed for your PC
operating system. If necessary, try reinstalling the driver.

◆

Check that the network adapter‘s speed or duplex mode has not been
configured manually. We recommend setting the adapter to auto-

negotiation when installing the network driver.

– 106 –

Symptom

Action

ROUBLESHOOTING