LevelOne WBR-6005 - Manual (Page 36)

N OTE :
If you are unsure of the PC MAC address originally registered by
your ISP, call your ISP and request to register a new MAC address for your
account. Register the default MAC address of the Wireless Router.
S TEP 3 - WAN
S ETTINGS - S TATIC IP
Configures a static IP for the WAN port.
Figure 16: Wizard Step 3 - WAN Settings - Static IP
The following items are displayed on this page:
◆ WAN Connection Type — Select the connection type for the WAN port
from the drop down list. (Default: DHCP)
◆ IP Address — The IP address of the Wireless Router. Valid IP
addresses consist of four decimal numbers, 0 to 255, separated by
periods.
◆ Subnet Mask — The mask that identifies the host address bits used for
routing to specific subnets.
◆ Default Gateway — The IP address of the gateway router for the
Wireless Router, which is used if the requested destination address is
not on the local subnet.
◆ Primary DNS Server — The IP address of the Primary Domain Name
Server. A DNS maps numerical IP addresses to domain names and can
be used to identify network hosts by familiar names instead of the IP
addresses. To specify a DNS server, type the IP addresses in the text
field provided. Otherwise, leave the text field blank.
◆ Secondary DNS Server — The IP address of the Secondary Domain
Name Server.
– 36 –
C HAPTER 4 | Initial Configuration
Setup Wizard