Lifescan SureStep Pro - Manual (Page 69)

57
Changing the Batteries
The SureStepPro Bedside Unit is powered by two
size C alkaline batteries. Change the batteries
when the LOW BATTERY message appears on
the screen. You may want to change the batteries
if the battery bar on the Status screen is low.
However, the unit will continue to function
properly until the LOW BATTERY message
appears.
▲ CAUTION
Do not use rechargeable batteries.
■ NOTE
Neither the LOW BATTERY message nor the
removal of batteries affects the test results
stored in the bedside unit’s memory.
BU.book Page 57 Monday, October 28, 2002 11:14 PM