Lifescan SureStep Pro - Manual (Page 34)

Quality Control Test
22
The QC Test screen appears with messages
prompting you to apply the control to the test
strip and then insert the test strip.
Applying Control Solution to Test Strip
▲ CAUTION
Applying too much or too little control
solution may cause out-of-range results.
Apply the control solution as follows:
• Gently shake the control solution vial.
• Touch a drop of control solution to the center
of the pink test square.
8
BU.book Page 22 Monday, October 28, 2002 11:14 PM