Lifescan SureStep Pro - Manual (Page 31)

19
Select QC Test from the
Main Menu.
Enter your operator ID,
either by pressing the
touch screen or using the
barcode scanner. Refer to
page 8 for information on
scanning a barcode.
Depending on the configuration option setting,
you may or may not be required to enter your
operator ID.
If your operator ID is required, a configuration
option may be set to remember your ID for up to
1 hour after the bedside unit is turned off. If
your ID appears at the operator ID screen, press
Ok to confirm it is correct. If the ID is not
correct, simply enter your ID and it will replace
the existing ID.
3
4
BU.book Page 19 Monday, October 28, 2002 11:14 PM