beautypg.com

Safety chains, Trailer brakes, Trailer lamps – Lincoln 2009 Navigator User Manual

Page 670: Tires, wheels and loading

background image

4. Attach the trailer to the vehicle and adjust the hitch equalizers so that
the front bumper height is within a

1

2

” (13 mm) of the reference point.

After proper adjustment, the rear bumper should be no higher than in
Step 3.

5. Turn the air suspension (if equipped) control to on.

WARNING: Do not adjust a weight distributing hitch to any
position where the rear bumper of the vehicle is higher than it

was before attaching the trailer. Doing so will defeat the function of
the weight distributing hitch, which may cause unpredictable handling,
and could result in serious personal injury.

Safety chains

Always connect the trailer’s safety chains to the frame or hook retainers
of the vehicle hitch. To connect the trailer’s safety chains, cross the
chains under the trailer tongue and allow slack for turning corners.

If you use a rental trailer, follow the instructions that the rental agency
gives to you.

Do not attach safety chains to the bumper.

Trailer brakes

Electric brakes and manual, automatic or surge-type trailer brakes are
safe if installed properly and adjusted to the manufacturer’s
specifications. The trailer brakes must meet local and Federal
regulations.

WARNING: Do not connect a trailer’s hydraulic brake system
directly to your vehicle’s brake system. Your vehicle may not

have enough braking power and your chances of having a collision
greatly increase.

The braking system of the tow vehicle is rated for operation at the
GVWR not GCWR.

Trailer lamps

Trailer lamps are required on most towed vehicles. Make sure all running
lights, brake lights, turn signals and hazard lights are working. Contact
your authorized dealer or trailer rental agency for proper instructions
and equipment for hooking up trailer lamps.

2009 Navigator (nav)
Owners Guide, 2nd Printing
USA
(fus)

Tires, Wheels and Loading

246