Entertainment systems – Lincoln 2009 Navigator User Manual

Page 464

from the auxiliary source, the screen will remain black. If the video
source is set to DVD-AUX, the display will automatically turn on if a
video signal is detected.

To listen to audio over the headphones— Dual play mode
(Navigation-based radio systems only):

You may listen to channels A and B over wired or wireless headphones.
Refer to Using the infrared wireless headphones and Using wired
headphones for further information.
• Black (4) — wired headphone output (wired headphones not

included)

There are two ways to get into dual
play mode:

1. After initially switching ignition
on, when a is disc inserted, the FES immediately switches to dual-play
mode.

2. Press the headphone/speaker

button on the DVD player or

navigation radio touch screen.

3. Press the 2 and 4 memory presets on the radio at the same time.

Repeating each of these actions will switch back to single play mode, all
speakers playing and headphones off.

A green light will illuminate next to either the A or B Headphone Control
Button to indicate which channel is active (able to be controlled).

4. Press MEDIA to change the audio source of the active channel (A or
B). The audio source will be shown on the display. You may change the
active channel by pressing the A or B headphone control button.

Note: Channel A can access any possible media source (AM, FM1, FM2,
SAT (if equipped), CD, DVD, AUX). Channel B can only access DVD and
AUX sources.

Note: Refer to Single play/Dual play for more information.

To listen to audio over the headphones— Dual play mode
(Non-navigation based radio systems):

included)

2009 Navigator (nav)
Owners Guide, 2nd Printing
USA (fus)

Entertainment Systems