0 introduction, 1 features, 2 applications – Liebert UPS User Manual
Page 5: 1 liebert is-webrt3 card web interface, 2 liebert web card provides shutdown utilities, Liebert multilink, Ntroduction, Features, Applications, Liebert is-webrt3 card web interface

Introduction
1
1.0
I
NTRODUCTION
1.1
Features
The Liebert IS-WEBRT3 card is a new generation SNMP (Simple Network Management Protocol)
UPS monitoring product. The card permits remote control of the UPS and enables reporting its cur-
rent status.
The Liebert IS-WEBRT3 card is simple and easy to install: insert the card into a compatible UPS,
install the Liebert DeskPro-Net
™
software on the included CD on a Windows
®
operating system and
configure the IP address. All other configuration may be done with a Web browser.
The Liebert IS-WEBRT3 card also provides shutdown, using Liebert MultiLink
™
, for different operat-
ing systems. It can be configured to send a shutdown command for such events as utility power failure
and low battery.
1.1.1
Features
• Provides SNMP MIB to monitor and control UPS
• Auto-senses 10M/100M fast Ethernet
• Manages and configures via Telnet, Web browser or NMS
• Supports TCP/IP, UDP, SNMP, Telnet, SNTP, PPP, HTTP, SMTP protocol
• Sends both SNMP traps and e-mails for event notification
• Automatically e-mails a daily UPS history
• Matches with shutdown software to protect computer’s file saving and shut down safely
1.2
Applications
1.2.1
Liebert IS-WEBRT3 Card Web Interface
The system administrator can use a Web browser to check the status of all UPSs where a Liebert
IS-WEBRT3 has been installed. The administrator can access a UPS by entering its IP address in the
browser. When utility power surges, sags or fails, the Liebert IS-WEBRT3 can, if so configured, also
send the trap information to the system manager to take proper action.
1.2.2
Liebert Web Card Provides Shutdown Utilities
A computer on the network with the Liebert IS-WEBRT3 card and DeskPro-Net Utility installed can
locate all Liebert IS-WEBRT3 cards on the network. Liebert MultiLink can be set up to close open
files and perform a graceful system shutdown when a UPS with a Liebert IS-WEBRT3 card experi-
ences an input power failure or low battery.
Liebert MultiLink
Liebert MultiLink software is availabl
User manuals for Liebert MultiLink are available at the Liebert Web site: