Liebert UPS - Manual (Page 12)

UPS Web management by Liebert IS-WEBRT3 Card
8
5.2.1 Information
Sub-Menu
• System Status
• Basic Information
• Current Status
• Remote Control
• Meter/Chart
System Status
This page shows the Liebert IS-WEBRT3 card system information and Network settings. Values
shown here are either provided by the Liebert IS-WEBRT3 card or they are user settings from the
Configuration pages.
System Information
This section shows the Liebert IS-WEBRT3 card system information. Values in Hardware Ver-
sion/Firmware Version/Serial Number/System Time are provided by the Liebert IS-WEBRT3 card.
Other values are user settings from the Configuration pages.
Network Status
This section shows the Liebert IS-WEBRT3 card Network settings. The MAC address is provided by
the Liebert IS-WEBRT3 card. All other values in this section are user settings from the Configuration
pages.
Figure 10 System status
5.2.2 Basic Information
This page show the UPS basic information. Values here are either provided by the UPS or they are
user settings from the Configuration pages.
UPS Information
Information about UPS Manufacturer/UPS Firmware Version/UPS Model are provided by the UPS.
Battery Information
Values here are user settings from the Configuration pages.
Rating Information
Values here are user settings from the Configuration pages.