4 remote control, Cancel test, Turn off ups when ac failed/reboot ups – Liebert UPS User Manual
Page 14: Put ups in sleep mode for __ minutes/wake up ups, Figure 13 remote control, 5 meter/chart, Figure 14 meter/chart, Remote control, Meter/chart, Figure 13 remote control figure 14 meter/chart
UPS Web management by Liebert IS-WEBRT3 Card
10
5.2.4
Remote Control
This page provides remote UPS test functions. Choose the test item, then click on Apply to execute it.
(Please refer to the UPS manual for individual UPS Test functions.)
If you are using a Contact Closure UPS, you will only be able to use the function Turn off UPS when
AC Failed.
Cancel Test
This function aborts a test when it is executing.
Turn Off UPS When AC Failed/Reboot UPS
Selecting Turn off UPS when AC failed will turn off the UPS. You can reboot the UPS by selecting
Reboot UPS.
Put UPS in Sleep mode for __ minutes/Wake up UPS
When the UPS is put into Sleep mode, it will not provide power. The UPS will provide power after
exiting Sleep mode.
Figure 13
Remote control
5.2.5
Meter/Chart
This page displays the UPS’s temperature, capacity, load, voltage, etc., with meter diagrams.
Figure 14
Meter/Chart