LST EDS500-1 - Manual (Page 2)

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED EDS-UMB500-1_DBL_LST_EN_0804.PDF • PAGE 2
A
Building Safety. Building Security.
Monitor Module ÜMB500-1
The Monitor Module ÜMB500-1 (fi g. B) is an addressab-
le module for the integration of a contact detector, such
as a pressure switch or a temperature monitor, into the
bidirectional communication on the ADM loop with Sys-
tem Sensor/200 protocol.
The module is fi tted into a round, transparent plastic
case and is connected to the detector and the loop by
means of 4 fl ying leads. The module address is entered
using a push button and can be verifi ed by means of an
LED. Since the module has no mounting mechanism of
its own, it must be mounted in the detector housing.
Specifi cations
Operating voltage Supply through loop voltage
Current consumption approx. 300µA (quiescent)
Ambient temperature -20°C to +60°C
Dimensions ш Ч H 45 × 16 (mm)
Colour transparent
Weight 16g
Order number 249091
Order name Monitor Module/Box/Anal./500/SS ЬMB500-1