LST WMSOU-xx-P02 User Manual

Description

WMSOU-xx-P0x_DBL_LST_EN_0804.PDF • PAGE 1

Building Safety. Building Security.

Description

The loop powered multitone sounder is ﬁ tted into a round

plastic case. It is powered and actuated as a module via

the ADM loop with System Sensor/200 protocol.

The sounder can be activated by a Fire Detection Con-

trol Panel Series BC216 with two different tone types,

depending on the parameter setup. One of 32 different

tone type combinations can be selected with a DIL-

switch. The following tones are available, for example:

• Continuous tone 660Hz,

• Emergency signal according to DIN 33404,

• Slow whoop tone according to NEN 2575,

• Alternating tone 800/970Hz, and many more.

The sound level can be selected in 3 steps. The address

of the sounder is selected with two decadic rotary swit-

ches located at the bottom of the device.

The sounder is designed for indoor and outdoor wall

mounting. For this purpose a special base is needed.

Various base types for protection classes IP24, IP44

or IP65 are available, depending on the application. An

optional mounting plate can be supplied for surface

mounted cabling.

The sounder is available in two colours and two diffe-

rent versions: With or without integrated dual-isolator

module.

• ADM loop technology with

System Sensor/200 protocol

• Can be activated with two different

tone types, 32 tone types selectable

• Sound level selectable in three steps

– up to 100db(A)

• Low power consumption
• Versions with or without integrated

dual-isolator available

• Various base types available

Speciﬁ cations

Operating voltage

Supply through loop voltage

Sound level

typ. 82dB(A) at 1m distance (low)

typ. 90dB(A) at 1m distance (medium)

typ. 96dB(A) at 1m distance (high)

max. 100dB(A) at 1m distance (high)

Ambient temperature

-25°C to +70°C

Dimensions ш Ч H

115 × 68 (mm) (incl. base LPBW)

Weight

204g

This manual is related to the following products:

WMSOU-xx-P01