Linksys RV016 - Manual (Page 86)

75 Chapter 6: Setting up and Configuring the Router
Wizard Tab
10/100 16-Port VPN Router
Static IP
If you chose Static IP, the screen shown in Figure 6-106 will appear. Complete the Static IP, Subnet Mask, and
Default Gateway fields with the settings provided by your ISP. Click the Next button, and then the screen
shown in Figure 6-107 will appear.
Enter the DNS server IP addresses you want to use (you must enter at least one). Click the Next button to
continue, and proceed to step 6. Click the Previous button if you want to return to the previous screen. Click
the Exit button if you want to exit the Setup Wizard.
Figure 6-107: Static IP - DNS Servers
Figure 6-106: Static IP