Linksys RV016 - Manual (Page 53)

42 Chapter 6: Setting up and Configuring the Router
System Management Tab - Factory Default
10/100 16-Port VPN Router
System Management Tab - Factory Default
Use this screen to clear all of your configuration information and restore the Router to its factory default settings.
Only use this feature if you wish to discard all the settings and preferences that you have configured.
Click the Return to Factory Default Setting button if you want to restore the Router to the factory default
settings. After clicking the button, a confirmation screen will appear. Click the OK button to continue.
System Management Tab - Firmware Upgrade
Firmware Upgrade
You can use this feature to upgrade the Router’s firmware to the latest version. To download the firmware, refer
to the Firmware Download section. If you have already downloaded the firmware onto your computer, then click
the Browse button to look for the file. Then click the Firmware Upgrade Right Now button.
Firmware Download
If you need to download the latest version of the Router’s firmware, click the Firmware Download from Linksys
Web Site button. You will see the Support page of the Linksys website. Select the 10/100 16-Port VPN Router
from the pull-down menu, and choose the firmware from the available options. After downloading the firmware,
follow the Firmware Upgrade instructions. Figure 6-37: Confirm Return to Factory Default Settings
Figure 6-38: Firmware Upgrade
Figure 6-36: Factory Default