Lowrance electronic iFINDER GO User Manual
Page 79
73
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
Trail Options menu.
Press
↓ to
U
PDATE
C
RITERIA
|
ENT
|press
↓ or ↑ to select criteria type|
ENT
.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mile.
With Update Criteria selected, press
↓ to either the rate or distance
data entry boxes and press
ENT
. Press
↑ or ↓ to change the first charac-
ter, then press
→ to the next character and repeat until the entry is
correct. Press
EXIT
|
EXIT
to return to the Trail Options Menu.
Trail Options menu.
Specific Trail Options
Delete Trail
To delete a specific trail: From the Trails menu, press
↓ to trail
name|
ENT
. The Edit Trail menu appears as seen in the following fig-
ure. Press
↓ to
D
ELETE
T
RAIL
|
ENT
|
← to
Y
ES
|
ENT
.