Lowrance electronic iFINDER GO - Manual (Page 48)

42
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press ENT |
↓ to
(R OUTE END ) | ENT |
↓ to
A DD F ROM M AP
| ENT . The Map
Page appears with the cursor showing.
3. Use the Zoom keys and arrow keys to move the map and cursor until
the cursor is centered on the spot where you want your route to begin.
(If you are starting at your current position or the current cursor posi-
tion, you are already at the starting spot.)
4. Set the first route waypoint: press ENT . In this example we moved to
the intersection of 11th Street and 145th E. Ave. to start our route to a
public hunting area next to a river.
1. 2. 3.
Route creation sequence, from left: Fig. 1. Set route waypoint (1) at
11th St. & 145th Ave. Fig. 2 and 3. Zoom in; move cursor north to set
point (2) at intersection with interstate I-44. In figures 2 and 3, notice
the rubber band line extending from the previously set waypoint to
the cursor. This line will become the course for the route.
4. 5. 6.
Route creation sequence, continued: Fig. 4. Point (2) set at on-ramp,
zoom out and use the
→ to move east toward end of route. Fig. 5. Zoom
in to set waypoint (3) at highway exit to frontage road leading to river.
Waypoint (4) ends the route at a tree stand in the hunting area. Fig. 6.
Press EXIT to save the route and you return to this screen.