Ping the access point, Ping the printer – Lexmark 6500 Series User Manual
Page 152

If you set a new network name, you must reset the printer and computer SSID to the same network name.
•
To reset the computer network name, see the documentation that came with your computer.
•
To reset the printer name:
1
Click Start
Programs or All Programs Lexmark 6500 Series.
2
Click Wireless Setup Utility.
3
Follow the instructions on the computer screen, and enter the new network name when prompted.
Ping the access point
1
If you do not already know it, find the IP address of the wireless access point (wireless router).
a
Do one of the following:
•
In Windows Vista, click
All Programs Accessories Command Prompt.
•
In Windows XP, click Start
Programs or All Programs Accessories Command Prompt.
b
Type ipconfig.
c
Press Enter.
•
The “Default Gateway” entry is typically the wireless access point (wireless router).
•
The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.
2
Ping the wireless access point (wireless router).
a
Do one of the following:
•
In Windows Vista, click
All Programs Accessories Command Prompt.
•
In Windows XP, click Start
Programs or All Programs Accessories Command Prompt.
b
Type ping followed by a space and the IP address of the wireless access point (wireless router). For
example:
ping 192.168.0.100
c
Press Enter.
3
If the wireless access point (wireless router) responds, you will see several lines appear that start with “Reply
from”. Turn off and restart the printer.
4
If the wireless access point (wireless router) does not respond, after several seconds you will see “Request
timed out.”
a
Do one of the following:
•
In Windows Vista, click the
Control Panel Network and Internet Network and Sharing
Center.
•
In Windows XP, click Start
Settings or Control Panel Network Connection.
b
Select the appropriate connection from the ones shown.
Note: If the computer is connected to the access point (router) by an Ethernet cable, the connection may
not include the word “wireless” in its name.
c
Right-click the connection, and then click Repair.
Ping the printer
1
Do one of the following:
•
In Windows Vista, click
All Programs Accessories Command Prompt.
•
In Windows XP, click Start
Programs or All Programs Accessories Command Prompt.
152