Printing transparencies – Lexmark Z35 User Manual
Page 43
43
Printing transparencies
You can load up to 25 transparencies, depending on the thickness of the transparencies.
Step 1: Load the transparencies
•
Use transparencies designed for inkjet printers.
•
If the transparencies have paper backing sheets, make
sure you separate the paper from the transparencies
before you load them.
•
Make sure your transparencies are not used or damaged.
•
If your transparencies came with instructions, read them
carefully.
•
Make sure the rough (print) side of the transparencies is facing you. If the
transparencies have a removable strip, make sure each strip faces away from you and
down.
•
Load the transparencies vertically against the right side of the paper support.
Note: Do not push the transparencies too far into the printer.
•
Squeeze and slide the paper guide to the left edge of the transparencies.