Linksys EFG80 - Manual (Page 4)

Etherfast Network Attached Storage
Chapter 2: Getting to Know
the Instant GigaDrive™
All of the Instant
GigaDrive’s connec-
tors and switches are
on the rear panel, as
shown in Figure 2-1.
Power Switch The Power switch is a spring-loaded soft switch that powers
the Instant GigaDrive™ on and off. If the Instant GigaDrive™
is not powered on, pressing the Power switch will start the
Instant GigaDrive’s start-up process. Pressing the Power
switch while the Instant GigaDrive™ is turned on will begin
it’s internal shut-down process. The Instant GigaDrive™ must
be powered off this way, or through its internal shutdown
process that is located in the web configuration.
Power Port The Power Input port is where the power cord plugs in.
Never remove the power cord while the Instant Gigadrive™
is turned on.
Printer Port You can also add a printer to your network through the
Instant GigaDrive’s Printer port. You attach a printer using
DB-25 printer cable.
3
The Instant GigaDrive’s Rear Panel
Figure 2-1
Instant GigaDrive TM Series
The following items should be included in the Instant GigaDrive’s packaging.
If any of these items are damaged or missing, please contact your Linksys deal-
er for replacements.
• One Linksys Instant GigaDrive™
• One Power Cord
• One Ethernet Network Cable
• One Setup Wizard CD-ROM
• One User Guide
• One Quick Installation and Registration Card
• Windows 98, NT 4.0, 2000, Millennium, or XP
• 10BaseT or 100BaseTX Ethernet network
• TCP/IP protocol installed
2
Minimum Requirements
Package Contents
D Diis sc clla aiim me err: Linksys highly recommends that you regularly back up the files
that are on the Instant GigaDrive™ . Linksys is not responsible for any data
loss, nor will Linksys perform any recovery on lost data or files.