Linksys EFG80 - Manual (Page 10)

Etherfast Network Attached Storage
Local Time. Set your current time here.
Time Zone. Select your local time zone from the drop down menu here.
Local Date. Set your current date here.
Click the Next button on the right to proceed or the Back button to return
to the previous screen.
8. On the next screen, shown in Figure 4-9, review the Instant GigaDrive’s set-
tings. If they are correct, click the Save button on the right. If you would
like to change them, click the Back button to return to a previous screen.
9. A screen will appear, shown in Figure 4-10, cautioning you that changes to
the Instant GigaDrive’s settings are being made. To save these changes,
click the OK but-
ton or click the
Cancel button to
return to the previ-
ous screen.
15
Instant GigaDrive TM Series
7. Go to the next screen (Figure 4-8) if you chose a Fixed IP Address, or if you
selected a Dynamic IP Address in Step 4 . From this screen, you can change the
time and date on the Instant GigaDrive™.
14
Figure 4-9
Figure 4-10
Figure 4-7
Figure 4-8