Linksys EFG80 User Manual

Page 15

Etherfast Network Attached Storage

The Status Information screen allows you the check the details and status of
your GigaDrive.

System

System GigaDrive Name - The current name. This name will
be shown in "Network Neighborhood" or "My Network
Places". IP Address - IP Address currently used by the
GigaDrive Server. Current Status - Indicates the current status
of the Server. This will usually state "Available". If the Server
is not available, the message will say why the Server is not
available (e.g. Scandisk in Progress.)

Instant GigaDrive

Series

set the disk usage for the user. Enter the maximum amount of
disk space the user is allowed to use. Click on the Clear Form
button to clear the form for the entry of a new user. Click on
Save as new User to create a new user, after entering their data
in the Properties fields. Click on the Save button to save any
changes you have made to the Properties for an existing user.
To modify the properities for an existing user, select the desired
user from the list. Their details will be displayed in the
Properties fields. Edit the fields as required. Note that you can-
not change the Create matching Share and Folder option when
modifying a user. However, you can use Share (Private Folder)
Location field to change to location of a user's Private Folder,
if it already exists. Click the Save button to save your changes.

Figure 5-9

Administration Tab - Status Information