Linksys EFG80 User Manual
Page 19

Etherfast Network Attached Storage
The Upgrade screen allows you to upgrade the Firmware to your Gigadrive.
Current Firmware
This shows you the current version of the firmware that is
on your Gigadrive. Click on Check for Update to browse
for the latest version of firmware.
Upgrade
Click on the Browse button to browse for the latest version
of firmware, then click on Start Upgrade.
Click on the Help button to get more information.
33
Instant GigaDrive
TM
Series
Format Disk
If you have installed a new hard drive into the GigaDrive’s
expansion slot, you will need to format the hard drive with
the new format utility. Click Format Disk to format the hard
drive.
Self-Test
This test tells you the condition of the hard drive. Your hard
drive must support S.M.A.R. T. to run the test. Click on Test
Now if you want to run the test immediately. In Run Test:,
select the time and frequency that you want to run the test.
Scandisk
This checks your hard drive for directory structure, available
space, and overall condition of files.
Defrag
This checks your hard drive for fragmented files. Run this
test to Defrag your hard drive.
Standby
Select the amount of time that you want your hard drive to
wait before going into standby mode.
Click on the Save button to save any changes you have made to Properties.
Click on theCancel button to clear all changes. Click on the Disk Log to see
the log of your disk settings. Click on the Help button to get more information.
32
Figure 5-15
Administration Tab - Upgrade