Initialize error log, Initialize error log -3 – Lexmark 1020 User Manual

Page 28

Text mode
Original mode

3-3

4078-00X

Initialize Error Log

This test tracks intermittent errors.

Use this procedure to reset the error log to zero. The error log is
especially helpful in diagnosing intermittent or difficult problems.
The test is complete when power is turned off.

To run the test:

1. Place a sheet of paper in the sheet feeder far enough to push

the End-of-Form flag out of the sensor.

2. With the printer off, hold down the Install Print Cartridge

button

while turning the printer on.