Envelope feed service check, Envelope feed service check -7, Envelope feed service – Lexmark 1020 User Manual
Page 17

Diagnostic Information 2-7
4078-00X
Envelope Feed Service Check
6
Home Position
Sensor
Perform the
“EOF and Home Position Sensors
, to check the Home Position
Sensor. If you cannot enter the test, replace the
system board. If the test fails, turn the printer off
and disconnect CN5 from the system board. Turn
the printer on and check for 5 V dc between CN5-1
and ground, at the system board. If the voltage is
present, replace the home position sensor. If the
voltage is not present, replace the system board.
7
Maintenance
Station
A problem with the maintenance station can cause
carrier movement problems at the right margin. Go
to the
“Maintenance Station Service Check” on
.
FRU
Action
1
Envelope Guide
Be sure the envelope guide has been turned to
the envelope load position.
Be sure the envelope guide is against the
envelopes.
Perform the
.
FRU
Action
- E260d (142 pages)
- 6600 Series (173 pages)
- 10N0227 (1 page)
- Z12 (2 pages)
- 301 (144 pages)
- NO. 35 (1 page)
- Z65n (111 pages)
- dn2 (217 pages)
- 10E (144 pages)
- Z2300 (54 pages)
- 230 (213 pages)
- 310 Series (2 pages)
- PRO700 (24 pages)
- C 720 (18 pages)
- C520 (145 pages)
- X656 MFP (104 pages)
- Prospect Pro207 (27 pages)
- 337 (258 pages)
- OptraImage 242 (207 pages)
- T64x (6 pages)
- C524 (146 pages)
- 4098-001 (70 pages)
- 1200 Series (21 pages)
- X650 Series (8 pages)
- 5300 (179 pages)
- 302 (274 pages)
- 4549 (235 pages)
- 202 (320 pages)
- 4076-0XX (89 pages)
- 10N0016 (1 page)
- 5025 (171 pages)
- 1361760 (1 page)
- C 546dtn (6 pages)
- Interpret S400 (40 pages)
- x6575 (2 pages)
- 27S2156-001 (2 pages)
- MENUS AND MESSAGES C522 (55 pages)
- Z35 (101 pages)
- Z25 (24 pages)
- series x5100 (77 pages)
- Z82 (105 pages)
- 2500 Series (76 pages)
- 1200 (208 pages)
- Z33 (114 pages)
- 7600 Series (181 pages)