LST 55100-908 - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED 55100-908_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Specifi cations
Description
The Manual Call Point 55100-908 complies with the
standard EN 54-11/A and is designed for use in ADM
loops with Apollo/Discovery protocol.
The detector is activated by pressing in the pane of
plastic. By means of a special key, the pane can be
put back to the idle position, thereby resetting the de-
tector.
The two-coloured status LED indicates the activation of
the detector in red colour and the fault condition in yel-
low colour. The detector address is selected by means
of a DIL switch. A dual-isolator, which is integrated into
the detector, disconnects the adjacent loop elements
fast and safely in case of a short circuit.
The detector is fi tted into a plastic case and can be
mounted on a 60mm fl ush-mount installation box. By
means of the supplied case, surface mounting on a wall
is also possible.
• ADM loop technology with
Apollo/Discovery protocol
• Activation by pressing in the pane of
plastic
• Two-coloured LED indicates activation
and fault
• Integrated dual-isolator
• Operating instructions by means of
standardised symbols
Operating voltage Supply through loop voltage
Current consumption 100µA (quiescent)
Ambient temperature -20°C to +60°C (no condensation or icing)
Relative humidity max. 95% (no condenstation)
Protection class IP24
Dimensions W × H × D
with surface mount box 89 Ч 93 Ч 59 (mm)
installation on fl ush-mount installation box 89 Ч 93 Ч 28 (mm)
Colour fl ame red, RAL 3000
Weight 160g
Order number 245015
Order name Manual Call Point/Red/XP95/ISM/Flexi 55100-908