Lowrance electronic GlobalMap 12 - Manual (Page 27)

23
To change the update, highlight the “Set Plot-
ter Update Criteria” menu item, then press the
right arrow key. The screen at right appears.
To change the update to distance, press the
right arrow key while the “Plot Update Criteria”
menu is highlighted.
Change the plotter update time by highlighting
the “Plot Update Rate” menu, then press the
left or right arrow keys until the desired time appears.
The distance update is changed in the same manner. Highlight the “Up-
date Distance” menu, then press the left or right arrow keys until the de-
sired distance appears.
When you have everything on this menu adjusted to the desired settings,
press the EXIT key to erase the menu.
ICONS
The GlobalMap 12 has fifteen symbols or “icons” available. These icons
can be placed anywhere on the mapping screens. These can be used to
mark fishing spots, boat ramps, rest stops, airports, or whatever. You can
place an icon at your present position, or at the cursor location.
Place Icon - Present Position
To place an icon at your present position, simply
press the ENT key. The screen shown at right ap-
pears. Use the arrow keys to highlight the desired
icon. Now press the ENT key. The mapping screen
appears with the icon you selected placed at your
position when you first pressed the ENT key, not
your present position.
MAP - AFTER PLACING
ICON
MAP - BEFORE PLACING
ICON