Lowrance electronic GlobalMap 12 User Manual

Page 25

In the course-up mode, the screen is locked
into your original bearing to the recalled way-
point, regardless of your track. (Note: the track-
up and course-up modes do not work when
the unit is zoomed-in on an area covered by a
C-Map or Navionics cartridge.)

To select the desired mode, first press the
MENU key, highlight the “EARTH MAP OP-
TIONS” label, then press the right arrow key.
Now press the up or down arrow keys to move
the black box to the “UP ORIENTATION”, then press the left or right arrow
key to make the selection. Press the EXIT key to erase this menu.

PLOTTER OPTIONS
Plot Trail
The line extending from your present position is
called a plot trail. This unit lets you customize the
plot trail with the following menu items. All of the
items on the Plotter Options menu affect the plot
trail.

Plot Trail Flashing
Since there can be many lines on the mapping dis-
play, it’s helpful at to make the plot trail flash. This
usually makes it easier to see. The default for plot
trail flashing is on.To turn it off, highlight the “Plot
Trail Flashing” label on the “Plotter Options” menu,
then press the left arrow key. Press the EXIT key
to return to the map. Repeat the above steps to
turn the flashing on.

TRACK-UP

NORTH-UP

COURSE-UP