LST Vds BC216-1 User Manual

LST Safety

BC216-1_DBL_LST_EN_0804.PDF • PAGE 1

Building Safety. Building Security.

Description

• For application in small and

mid-sized systems

• Analogue ringbus technology with

unshielded detector cabling

• Addressable conventional technology
• Menu-driven operation
• Easy commissioning through

AUTO setup

• 32–bit multiprocessor system
• EN 54/VdS-certiﬁ ed

Fire is a permanent threat to life and property. There-

fore, immediate response to a ﬁ re is imperative. The

main objective of the ﬁ re detection control panel Series

BC216 is to alarm and to react in time and, conse-

quently, save lives and protect property. For decades

LST have focused their aims to undertaking unrivaled

efforts in order to realize new innovations in the security

area. Research, development and production are loca-

ted within LST premises, thus guaranteeing ﬂ exible and

reliable individual solutions.

Using a 32-bit multiprocessor system, the ﬁ re detection

control panel Series BC216 ensures topmost efﬁ ciency

and speed – prerequisites for saving lives and minimi-

zing damage to property.

The ﬁ re detection control panel BC216-1 is designed as

a modular system. According to your system‘s concept

and size, it can be expanded individually.

The control panel provides two slots for the connection

of function modules (Conventional Detector Interface

GIF8-1 or Loop Interface LIF64-1) to which a maximum

of 16 detector lines in addressable conventional techno-

logy or a maximum of two ADM loops or a combination

of the both can be connected. In this way, you obtain

the highest degree of ﬂ exibility for virtually any task.

The ADM loop principle offers intelligent analogue ring-

bus technology with bi-directional data transfer. Each

loop provides for the software-aided administration of

up to 198 physical address points in a maximum of 128

detector zones. Addressable conventional technology

allows for the connection of automatic and non-auto-

matic ﬁ re detectors as well as the unambiguous iden-

tiﬁ cation of the activated detector in the event of an

alarm.

Depending on the respective system, a Fire Brigade In-

terface FWI2-1, a Fire Brigade Interface Additional Board

FWZ2-1, an LED-Display Field LAB48 as well as further

optional componentries can be installed in addition.

Easy parameterisation on the control panel‘s display

and operating unit, via a PC keyboard, or by means of

a PC software enables you to tailor the control panel to

your individual requirements.