Lennox Hearth MODEL MONTAGE 32FS - Manual (Page 3)

3
Please read and carefully follow all of the instructions found in this
manual. Please pay special attention to the safety instructions provided
in this manual.
PRODUCT IS SUBJECT TO CHANGE WITHOUT NOTICE
CONGRATULATIONS!
When you purchased your new pellet stove, you joined the ranks of
thousands of individuals whose answer to their home heating needs
reflects their concern for aesthetics, efficiency and our environment.
We extend our continued support to help you achieve the maximum
benefit and enjoyment available from your new pellet stove.
Thank you for selecting a Lennox Hearth Products stove as the answer
to your supplemental home heating needs.
TABLE OF CONTENTS
Important Safety Information . . . . . . . . . . . . . . . . . . . . Page 2
Packaging List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Testing / Listing, EPA . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Using this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Planning Your Installation . . . . . . . . . . . . . . . . . . . . . . . Page 3
Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Floor Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Manufactured Home Installation . . . . . . . . . . . . . . . . . . Page 7
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8
Venting Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
Care and Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21
Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26
Component Definitions . . . . . . . . . . . . . . . . . . . . . . . . . Page 27
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 29
Replacement Parts List & Diagrams . . . . . . . . . . . . . . . Page 31
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 34
Safety / Listing Label . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 35
Product Reference Information
Page 36
This installation and operation manual will help you obtain a safe, effi-
cient, dependable installation for your appliance and vent system.
PLEASE READ AND UNDERSTAND THESE INSTRUCTIONS
BEFORE BEGINNING YOUR INSTALLATION
Listing: The listing laboratory is ITS (Intertek Testing Services) and the
listing mark is Warnock Hersey. The report number is 3105656MID for
model Montage 32FS pellet stove.
Testing: In accordance with the specifications and procedures
• Listed and tested to ASTM E1509 & ULC C1482 / ULC S627 for instal-
lations as a freestanding room heater
• The safety/listing label is located on an inside hopper surface of the
pellet stove. Please read this safety label carefully. It contains important
information about installation and operation of this appliance.
• This appliance is tested and listed for residential installation according
to current national and local building codes as:
• A Free-Standing Room Heater
• A Manufactured Home Heater
EPA (Environmental Protection Agency)
Status: EPA Certified (method 8) - This appliance has been tested to
rigorous emissions standards, and has been certified by the Environ-
mental Protection Agency.
TESTING / LISTING
USING THIS MANUAL
Questions To Ask Local Building Official
A correct installation is critical and imperative for reducing fire hazards and
perilous conditions that can arise when wood pellet burning appliances
are improperly installed. The installer must follow all of the manufactur-
ers’ instructions.
PLANNING YOUR INSTALLATION
The assembled pellet stove model Montage™ 3FS is packaged with
an accessory package in the hopper and a grate scraper tool secured
to the pallet:
One - Installation And Operation Manual
One - Warranty
One - Power Cord
One - Grate Scraper Tool
One - Wall Thermostat w/ 20 Foot Roll Of Wire
One - 5/32" Allen Wrench
One - Cleaning Brush
Packaging List
WARNING
Check all local building and safety codes before
installation. The installation instructions and appro-
priate code requirements must be followed exactly
and without compromise. Alterations to the stove are
not allowed. Do not connect the stove to a chimney
system serving another stove, appliance, or any air
distribution duct. Failure to follow these instructions
will void the manufacturers warranty.
The installation of this appliance must conform to local codes and appli-
cable state and federal requirements. Familiarity with these requirements
before installation is essential. Important considerations to discuss with
local building officials include:
1. Applicable codes (i.e. Uniform Mechanical Code, State or Regional
Codes).
Electrical codes:
In USA, NEC, ANSI/NFPA 70 – Latest Edition
In Canada, CSA C22.1 – Latest Edition